2026-09-05 15:40:58
45
6
凡人修仙传 韩立 动漫人物透光浮雕扇
@User_2920986
Donate
Message
Follow
Recommended printing method
Add
0.12层高
Kobra S1
/ Plates:1
/ 0m
2
Share
Description
浮雕扇单片扇叶长18cm，建议使用PLA Basic 玉石白打印，效果更佳，主图照片为0.12层高打印，要更好的效果可以设置0.08层高，但时间会更长，材料收缩率不一样，插销上几滴胶，防止脱落。
切换机器型号可能会改变象脚补偿，手动改为0.2mm，不同的机器打印完扇叶厚度可能会不一样，产生累计公差，导致插销可能会短或者长一些，首先用刀片把扇叶毛刺刮一刮再装配，如果长一点点，可以用刀片切短。
如需其他人物的可以留言！若模型对您有用，帮忙点点赞，谢谢！
Tags
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
Comments & Ratings
Here is empty
Remixes
