三层停车楼，是我对秩序与热爱的具象化。每一道车位线，每一根栏杆，都承载着深夜里的专注与热爱。

当超跑们依次入位，人偶在车旁驻足，这个微缩的世界，便有了自己的心跳。

This three-story parking garage is the embodiment of my pursuit of order and passion. Every parking line, every railing, carries the dedication and love I poured into it during those late nights.

As the supercars park one by one and the miniature figures stand beside them, this tiny world gains a heartbeat of its own.

模型尺寸：

• 整体建筑尺寸：180x180x214，单位毫米；
• 每个车位尺寸：75x34，单位毫米；
• 每个楼层高：64，单位毫米；
• Overall dimensions: 180 × 180 × 214 mm
• Each parking space size: 75 × 34 mm
• Floor height per level: 64 mm

工具：

• 尖嘴钳；needle-nose pliers
• 胶水；glue
• 一条长110cm的COB灯带；（这个长度是按现成模型高度测量的，可装可不装）One COB light strip with a length of 110 cm.(This length is measured according to the finished model’s height; installation is optional.)

注意事项：

• 图中人和车为非打印模型，需自行购买；
• 打印前需烘干耗材，清洁打印版，涂打印胶；
• 有些零件很小，容易丢失，请注意；
• 请按说明书安装；
• 如果想打印更多楼层，请将第二层的所有零件重新打印即可；
• Before printing, dry the filament, clean the build plate, and apply printing glue.
• Some parts are very small and easy to lose, so please be careful.
• Please install according to the instructions.
• If you want to print more floors, simply reprint all the parts from the second floor.
• The figures and cars in the picture are not included in the printed model and need to be purchased separately.