Thank you all for your support. I'm always happy to hear your opinions and suggestions for new models. So please share them in the comments.

You can offer me a coffee and support my work here >>> https://ko-fi.com/drakeforge3d  If you like my work and want to support me, I appreciate any support. The website also includes a commercial license that allows you to sell all my existing models.

Bring your D&D and tabletop adventures to life with this Dungeon Walls & Prison Cells terrain set, designed specifically for 28–32 mm miniatures.

This set contains 8 unique dungeon wall and prison elements, each placed on a separate build plate for convenient printing and organization. The pieces feature detailed stone blocks, broken walls, skulls, chains, shackles, reinforced doors, rubble, and other dungeon elements to create a dark and atmospheric environment for your tabletop games.

The models are designed for FDM 3D printing with supports and are optimized to provide strong, detailed pieces while remaining practical to print. The modular design allows you to combine the elements in different configurations and build everything from small prison cells to larger dungeon corridors and battle areas.

Set Includes

• 8 unique dungeon terrain elements
• Separate build plate for each element
• Prison cell and dungeon wall sections
• Broken and damaged stone walls
• Chain and shackle decorations
• Skull and dungeon details
• Rubble and destroyed stone elements
• Designed for 28–32 mm tabletop miniatures
• FDM-friendly design with supports

Perfect for D&D, Pathfinder, TTRPGs, tabletop RPGs, dungeon crawls, fantasy skirmish games, and miniature displays.

Print the pieces in a single color or experiment with different filament colors to create unique dungeon environments.

If you enjoy the set, download it, print it, and share your creations! Your makes and feedback are always appreciated.

   Guide

Each of my models is printed 2-3 times before releasing the profile. So if you have a problem with printing:

1. DRY THE FILAMENT

2. CHANGE THE NOZZLE TO A NEW ONE.

Recommendations Guide : In case of a problem with damage to the supports, I recommend reducing the printing speed of the supports by 30-50% and the travel speed to 400mm/s. When removing the supports, I recommend first cutting off the pieces right next to the character, but not removing them, just cutting them off. Remove the remaining larger pieces and only then detach the remaining smaller pieces. This reduces the risk of damaging delicate elements.

• Please note that if you use a different filament than the recommended one, the effect may be different from my print. For example, printing in silk PLA will look better but the supports and the print itself will be more brittle and less durable.
•  
•  
• Recommendations:
• 
  
•  
• 0.08-0.2. In the event of changing the original height, the height of the supports should be changed.
•  
• PLA+HS, PLA+, PLA, PLA silk Recommended materials are listed in order from best to good.
•  
• Clean the plate thoroughly before printing.
• Make sure the filament is dry and free from dirt. This can damage the print or weaken the support