Remixed so that

• Screw holes were modified to fit #10-32 screws and moved slightly to the side to accommodate larger nuts. 

The mecanum wheel is slightly larger than 2 inches in diameter, and you need 8 rollers per wheel.

If you want a different vector direction, mirror the side plates in the slicer.

Model Update [1/19/2026] - Added a new Nut Trap version that has holes for 3/8 in #10-32 nuts 

• Fits nuts 3/8 inches in diameter (common #10-32 nut size)
• Some nuts might stick out slightly
• Works best with 2-inch long screws, so that the screws don't stick out
• Screw holes were moved slightly more to the edge