Keychain replica of the Kombat Geo padel racket.

Available options:

• Single-Sided: a quick print with a textured finish on one side, no gluing needed.
• Double-Sided: two halves to glue together with cyanoacrylate (superglue). This option allows the racket design to be visible on both sides.

Print Settings:

• Nozzle: 0.4 mm
• Layer height: 0.2 mm
• Line Width: 0.35 mm ( It is important, as there are very thin lines)
• Layers: 3 Bottom / 3 Top
• Infill: 15% Gyroid
• Orientation: Print face down.
• Color Ordering (Important): Grey, Yellow, Red and Black.Always order the colors of the first layer from lightest to darkest. This will prevent darker filaments from bleeding into or staining the lighter areas. 

Filament:

• Yellow: Smartfill Recycled PLA
• Grey: Smartfill Recycled PLA
• Black: Smartfill Recycled PLA
• Red: Smartfill Recycled PLA

Note: These are small and precise parts. Make sure you have a clean build plate and dry filament to ensure good results. If you still do not get good results, you can scale the models in X and Y to make them slightly bigger.

I hope you like it and enjoy the model!

Explore the Full Padel Collection! Complete your padel gear with my other exclusive designs:

https://www.makeronline.com/en/user/collectionDetail/64491fda-f934-4007-949f-1a0b39cec833/417988.html

🧵 Want to go the extra mile?

You can help me create new designs by joining my team! Support my work here:

https://ko-fi.com/luzia3dstudio