Please note - while this is a straightforward print, it's not what I would call a beginner print - removal of supports will require some tools like snips/sidecutters and, most importantly, patience, I've tried to make it so that the points are not snapped off when trying to remove supports, which has happened with other models I've tried.
This is a 150mm tall statue/model of a dragon standing on a rock.
The example was printed with a layer height of 0.16; the profile I have used is saved in the 3mf file.
I set the outer layer speed low, which is better for silk, galaxy, and matte to maintain their finishes. If you do not need these slower outer wall speeds, perhaps for standard PLA, for example, then this can be increased to match the filament you are using.
The filament used in the photos is Jayo PLA Galaxy Dark Green.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
