**Mini RGB Light Cube**
A compact, beginner-friendly project requiring basic soldering and microcontroller programming.
**Printing Specs:**
**Settings:** 0.2mm layer height, 2 walls, 10% infill.
**Support:** None required.
**Material:** White filament is recommended for better diffusion, though clear offers a vibrant look.
**Assembly:** Use 3mm lengths of filament as alignment pins for the walls. Secure with superglue.
**Electronics & Wiring:**
**Hardware:** ESP32 C3 controller and 0.6m (98 LEDs) of WS2812B LED strip (2.7mm narrow, 160/m).
**Wiring:** White (GND), Red (5V+), Green (GPIO2).
**Assembly:** Spiral the LED strip carefully inside the housing. Use heat shrink tubing on solder joints to prevent pad breakage.
**Firmware:** Flash with WLED. Set LED length to 98 in "LED Preferences." Use the provided preset file for preconfigured effects.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
