Reconnaissance Aircraft - Blackbird SR-71​

Multiple movable parts on the model. Refer to the high-definition images for details. Length: 206mm. Material usage: approx. 45g (Bambu Lab PLA in White and Black). Printing time: approx. 5 hours.

Supports are easy to remove: first cut away the larger, thicker sections, then separate the parts connected to the fuselage.

Installation is straightforward—simply connect the parts according to the diagrams. Due to material properties and printing precision, sanding or gluing may be required during assembly.

====================================================================

黑鸟侦察机（黑鸟SR-71）

模型多处可动，看高清图，长206，用料45克（拓竹PLA白、黑），用时5小时左右。

支撑容易拆，要先把大的、厚的剪断，再分离与机体连接部分。

安装简单，看图接上就行。受材料与打印精度问题，有可能要打磨、上胶水。