2026-09-08 22:17:58
47
7
Transcend
@pozsar_4308928
Donate
Message
Follow
Recommended printing method
Add
0.2mm layer, 2 walls, 8% infill
Kobra S1
Kobra 3
、
Kobra 2
、
Kobra 2 Plus
、
Kobra 2 Neo
、
Kobra 2 Pro
、
Kobra 2 Max
、
Kobra 3 Max
、
Kobra 3 V2
、
Kobra X
/ Plates:1
/ 7h59m
4
Share
Description
If you like this this one, check out my other string art models here.
This print is pretty difficult to set up properly so please just use the prepared 3mf file that contains custom supports and all necessary settings.
Not scalable. Must be printed with 0.2mm layer height.
Be very careful when removing the support. I recommend using pliers to break off each branch one-by-one.
Commercial License:
You can subscribe for a commercial license membership on my Patreon.
Tags
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
Comments & Ratings
Here is empty
Remixes
