I've designed this digital business card with an NFC tag inside. The model has a pause at 1mm, so insert the NFC tag, ensure it sticks well, and then resume the print.

Suggestions:

• Make sure your build plate is really clean.
• You can use NFC Tools to program the NFC tag.
• You can use unit.link to create a digital business profile, then add the link using NFC Tools.
• You can add your logo by following the instructions below.
• I've used this NFC tags, 25mm diameter 0.2mm thick https://www.amazon.it/dp/B0CP634NCS?ref=ppx_yo2ov_dt_b_fed_asin_title.