Treasure Vault of Heaven and Earth​

Completely support-free printing. Print with separate layers and colors. Features abundant details, hollow doors and windows, and an internal central staircase. Insert a few dollars worth of colored lights for a stunning effect at night.

Assembly is simple—follow the main diagram for fitting. Due to material shrinkage and printing precision, sanding or gluing may be required in some cases. Apply firm pressure during assembly.

PLA, 0.2mm layer height, 2 wall layers, small parts printed at 80mm/s.

The model uses approximately 1000g of filament and takes about 2 days to print. Using three printers simultaneously can complete the printing within one day.

Before printing, remember to clean the PEI build plate to ensure proper adhesion and keep the filament dry.

===============================================================================================

天地宝库

全部无支撑，分层分色打印，大量节细，门窗镂空，内部中间有楼梯，放入几块钱的彩灯，晚上非常的好看。

拼装简单，看主图对着装，受材料收缩与打印精度影响，必要时打磨上胶水，用点力压。

PLA，0.2层高，2层墙，小部件速度80。

模型用料1000克左右，时长2天左右，三台打印机一起打，一天内完成。

打印前记得清洁好PEI打印板，保证其粘度OK，确保材料干燥

喜欢我作品的同学，请记得关注、下载、好评，感谢您的支持。

连接柱拼装对照，请看图，在对应的位置使用如下图一样长短的连接柱。