Stylish and usefull wall mount ball holder. Its prepared to print on 18cmx18cmx18cm work space. On printer with bigger work area its possibilyty to find better print position.
Print settings:
0,4mm nozzle
3 wall loop
0,16mm layer height
print with brim
tree supports treshold angle 25 degree
15% infill
material PLA / PETG (hard supports remove)
To remove all support easy ues pliers, small screwdriver and follow the steps:
1. Remove supports located outside the fingers
2. Divide large support parts to pices
3. Remove supports outside, but dont pull parts from inside
4. Pierce screw hole with some spike for example screw
5. Break up support inside useing small screwdriver or something similar
6. When support part inside is lose remove it through hole, repet 5 and 6 step untill all supports are removed
Model is strong enough to hold ball easy but its not that resistant to falling so be carefull when remove supports and mount on the wall
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
